ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: zImage-7300-2.6.21-ts from ftp site is not working.

To: naresh raga <>,
Subject: Re: [ts-7000] Re: zImage-7300-2.6.21-ts from ftp site is not working.
From: Sthenley Macedo <>
Date: Thu, 15 Oct 2009 14:10:03 -0300


Hello!

Thanks for reply.Actually I need 2.6 kernel on TS-7300.Will the steps in the link provided by you will generate a lenny image that will work on TS-7300?

I hope so :) I have only a TS-7400.

> Because TS-7300 had 3 partitions on it.But the steps in the link are generating a 4 partition card.

The 2.6 image works with 4 partitions. On my board was the same thing (2.4 image have only 3 partitions).

> Really Thanks for your suggestion, a question on TS-7300 2.6 kernel really had very less support from the ts-7000yahoo group as well as Technologic system engineers itself.

But Mr. Pert Ledvina helps a lot! :)

AFAIK, 2.6 Kernel donÂt have official support from TS.


Best regards,
--
__________________________________________
ÂÂS t h e n l e y  M a c e d o ÂÂCREA 2080TDPB
ÂÂLaboratÃrio de Engenharia Aplicada - APEL


__._,_.___


Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___
<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU