Re: [ts-7000] Re: Is MultiCast Routing needed to receive MultiCast frames on TS-7250

[Eric Robishaw <>]

Have you tried specifying the route for multicast routing?

something like:
route add -net 224.0.0.0 netmask 224.0.0.0 dev eth0

I had to do the above when there was more than one route (I had eth0 and ppp, didn't want my multicast going to ppp).

Eric

On Thu, Aug 27, 2009 at 1:23 PM, damotclese <> wrote:

 

--- In "damotclese" <> wrote:
> I do not receive MultiCrast frames on the TS-7250
> for some reason and the only thing I can think of
> for receiving frames is needing to run mrounted.

I posted the receive software over to Windows Cygwin DOS and it receives the multicast frames successfully so it must be something in the TS-7250 IP stack. The only thing I can think of is MultiCast Routing must be enabled in the kernel.

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___