To: | |
---|---|
Subject: | [ts-7000] TS-GSM1 failed to connect Network |
From: | "ts7300" <> |
Date: | Tue, 21 Jul 2009 11:53:33 -0000 |
Hi, I am using TS7300 BOARD with TS-GSM1(GR64 MODEM) board in PCI slot.Problem is that through minicom its show initializing string OK /ttyS0.During dialing using AT command i.e.atdt <<9999039589:>> on next line error will be printed on minicom.Neither LED is blinking at 2HZ after inserting GSM SIM.Will SIM is not compatible with modem.Network I am using Vodafone(India). ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: Unable to Use the WiFi after resolving 10ms timing issue., mohit.khanna |
---|---|
Next by Date: | [ts-7000] insmod TS modules in custom kernel, akmartin73 |
Previous by Thread: | [ts-7000] TS-7800 Read-only file system, Alejandro Weinstein |
Next by Thread: | [ts-7000] Re: TS-GSM1 failed to connect Network, ts7300 |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU