[ts-7000] TS-7800 Read-only file system

To:
Subject:	[ts-7000] TS-7800 Read-only file system
From:	Alejandro Weinstein <>
Date:	Mon, 20 Jul 2009 11:16:06 -0600

Hi:

I am booting my TS-7800 from the SD (the one supplied by TS) (the
jumper 1 is connected). The board boots OK, but the file system is in
read mode only. For instance, I get:

/ # man ls
man: can't create a temporary filename: Read-only file system

How can I change this?

Regards,
Alejandro.


------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7800 Read-only file system, Alejandro Weinstein <= Re: [ts-7000] TS-7800 Read-only file system, Robert Ulbrich Re: [ts-7000] TS-7800 Read-only file system, bill . whiteley

Previous by Date:	[ts-7000] TS-7800 eclipse under linux, Alejandro Weinstein
Next by Date:	Re: [ts-7000] TS-7800 Read-only file system, Robert Ulbrich
Previous by Thread:	[ts-7000] TS-7800 eclipse under linux, Alejandro Weinstein
Next by Thread:	Re: [ts-7000] TS-7800 Read-only file system, Robert Ulbrich
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU