Hi,
One thing I noticed is that during minicom utility its show initializing
string OK and then SIM is insterted its print
-----------------------------------
*ESTKSHMENU :HUTCH PLUS,0,2
1,HUTCH ALIVE
2,MY SERVICES
------------------------------------
Hutch is GSM Network.but after that for dialing I am using atdt <<phone
number:>> error is printed again.Neither LED is blinking at 2HZ its in soild
state.Can sombebody suggest upon something upon this????
--- In "ts7300" <> wrote:
>
> Kindly Suggest me something upon this.
> --- In "ts7300" <ts7300@> wrote:
> >
> > Hi,
> > I am using TS7300 BOARD with TS-GSM1(GR64 MODEM) board in PCI
> > slot.Problem is that through minicom its show initializing string OK
> > /ttyS0.During dialing using AT command i.e.atdt <<9999039589:>>
> > on next line error will be printed on minicom.Neither LED is blinking at
> > 2HZ after inserting GSM SIM.Will SIM is not compatible with modem.Network I
> > am using Vodafone(India).
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|