I got jumbled up..
when I opened minicom it show only inializing string OK.Nothing on terminal.But
once I plug out the SIM and then reinsert it again then on terminal it show
restart and then printed below on terminal
-----------------------------------
*ESTKSHMENU :HUTCH PLUS,0,2
1,HUTCH ALIVE
2,MY SERVICES
------------------------------------
Did you disable PIN security code check?
How can we check PIN security code is enable or not?
Is their any more setting need to done i.e.pin security etc.
--- In "janne.kario" <> wrote:
>
> --- In "ts7300" <ts7300@> wrote:
> >
> > Hi,
> > One thing I noticed is that during minicom utility its show initializing
> > string OK and then SIM is insterted its print
>
> Did you disable PIN security code check? The led should be blinking even
> before you start minicom when the GSM modem has been registered with the
> network.
>
> j
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|