Just did the lenny thing using the lenny filesystem from Technologics. X was
not working and still is not, because I'm not interested in using X, rather
QT/Embedded.
The framebuffer was not working either. Needed to copy the ts7390fb.ko from
the etch filesystem, then load all the modules having to do with the
framebuffer like (see if I can remember) fbcons.ko, bitblit.ko, softcursor.ko,
ts7370fb.ko ???.
After doing that, the framebuffer worked fine.
Just thought this might be helpful info.
Brian
--- In "akmartin73" <> wrote:
>
> I'd like to upgrade my TS-TPC-7390 to Lenny/armel following the instructions
> here http://ted.openavr.org/Lenny-on-ts7390/, but I was hoping someone could
> tell me before I go down that road, will video still work afterwards? I've
> tried the lenny filesystem from the ftp.embeddedarm.com and couldn't run
> X--I'm wondering if a clean install will be any different?
>
> Thanks,
> Andy
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|