On Mon, Feb 23, 2009 at 5:14 PM, dabetsr<> wrote:
> Hi everyone,
> I have been working with lenny both arm and armel for a
> while now and am interested in upgrading to a more recent version of
> the kernel (2.6.26 and up, possibly 2.6.28). I have seen this has been
> done for the TS-72xx boards but didn't see it for ts-7350 an 7390.
>
> Has it been done?
>
> If I wanted to do it where should I start? What patches would be
> necessary? And finally what would I need to add and recompile the
> modules specific to the TS boards (ts card modules etc...)?
I did this for 2.6.29.1 with Matt's patch set. To get the touch screen
and the framebuffer working, I copied the needed driver source from
the TS source tree and ported them to the 2.6.29.1 kernel source. I
have been meaning to send my patches to Matt so that others can use
them, but have not had the time. I just put my patches up here:
http://ted.openavr.org
Hope that helps.
Ted
>
> Thanks,
> Alberto
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|