You only need to specify the local_ip:remote_ip option on one side of
the link.
Choose which side you want to control the IP address allocation, and
use the option there.
If that doesn't work, let me know.
--- In "ts7300" <> wrote:
>
> At Board Side
> proxyarp
> ktune
> usepeersdns
> persist
> debug
> asyncamp
> nolock
> cdtrcts
> nomagic
> mru 1500
> mtu 1500
> 10.64.21.30:10.64.21.37
> ----------
> On Linux Distro
> persist
> debug
> asyncamp
> nolock
> cdtrcts
> nomagic
> mru 1500
> mtu 1500
> 10.64.21.37:10.64.21.30
>
> Thanx
> --- In "odonovan_dan" <danodonovan@> wrote:
> >
> > Hi
> >
> > Can you post the /etc/ppp/options* files that you're using on both
> > sides of the link, as well as any additional parameters that you may
> > be passing to pppd?
> >
> > Thanks,
> > -Dan
> >
> >
> >
> > --- In "ts7300" <ts7300@> wrote:
> > >
> > > hi,
> > > I am using ts7300 board and linux disrto for PPP link.and at
board
> > > side mgetty is running.When I am dialing from Linux Distro pppd call
> > ppp0
> > > Lcp packet
> > > Using interface ppp0
> > > Connect: ppp0 <--> /dev/ttyS0
> > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > rcvd [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > sent [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > rcvd [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > sent [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
15>]
> > > sent [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > > <ms-dns3 0.0.0.0>]
> > > rcvd [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
15>]
> > > sent [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
15>]
> > > rcvd [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > > <ms-dns3 0.0.0.0>]
> > > sent [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > rcvd [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
15>]
> > > Deflate (15) compression enabled
> > > rcvd [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > sent [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > > rcvd [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > > sent [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > > rcvd [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > > sent [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > > rcvd [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > > sent [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > > rcvd [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > > sent [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > > rcvd [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > > sent [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > > rcvd [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > > sent [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > > rcvd [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > > sent [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > > rcvd [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > > sent [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > > rcvd [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > > sent [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > > rcvd [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > > sent [IPCP ConfReq id=0x3e]
> > > rcvd [IPCP ConfReq id=0x3e]
> > > sent [IPCP ConfAck id=0x3e]
> > > rcvd [IPCP ConfAck id=0x3e]
> > > Peer refused to agree to our IP address
> > > Connect time 0.7 minutes.
> > > Sent 176 bytes, received 176 bytes.
> > > sent [IPCP TermReq id=0x3f "Refused our IP address"]
> > > sent [IPCP TermReq id=0x40 "Refused our IP address"]
> > > sent [LCP TermReq id=0x10 "No network protocols running"]
> > > rcvd [LCP TermReq id=0x10 "No network protocols running"]
> > > sent [LCP TermAck id=0x10]
> > > rcvd [LCP TermAck id=0x10]
> > > Connection terminated.
> > > Serial connection established.
> > > using channel 83
> > > Using interface ppp0
> > > Connect: ppp0 <--> /dev/ttyS0
> > > sent [LCP ConfReq id=0x11 <asyncmap 0xa0000> <pcomp> <accomp>]
> > > Modem hangup
> > > Connection terminated.
> > > ------------------------------------------------------
> > > can somebody tell me why peers refused to agree IP address.Is
> > > something missing in options file for which peers refuses toIP
> address.
> > > Can somebody guide me.
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|