Hi
Can you post the /etc/ppp/options* files that you're using on both
sides of the link, as well as any additional parameters that you may
be passing to pppd?
Thanks,
-Dan
--- In "ts7300" <> wrote:
>
> hi,
> I am using ts7300 board and linux disrto for PPP link.and at board
> side mgetty is running.When I am dialing from Linux Distro pppd call
ppp0
> Lcp packet
> Using interface ppp0
> Connect: ppp0 <--> /dev/ttyS0
> sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> rcvd [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> sent [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> rcvd [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> sent [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> sent [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> <ms-dns3 0.0.0.0>]
> rcvd [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> sent [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> rcvd [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> <ms-dns3 0.0.0.0>]
> sent [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> rcvd [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> Deflate (15) compression enabled
> rcvd [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> sent [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> rcvd [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> sent [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> rcvd [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> sent [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> rcvd [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> sent [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> rcvd [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> sent [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> rcvd [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> sent [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> rcvd [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> sent [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> rcvd [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> sent [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> rcvd [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> sent [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> rcvd [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> sent [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> rcvd [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> sent [IPCP ConfReq id=0x3e]
> rcvd [IPCP ConfReq id=0x3e]
> sent [IPCP ConfAck id=0x3e]
> rcvd [IPCP ConfAck id=0x3e]
> Peer refused to agree to our IP address
> Connect time 0.7 minutes.
> Sent 176 bytes, received 176 bytes.
> sent [IPCP TermReq id=0x3f "Refused our IP address"]
> sent [IPCP TermReq id=0x40 "Refused our IP address"]
> sent [LCP TermReq id=0x10 "No network protocols running"]
> rcvd [LCP TermReq id=0x10 "No network protocols running"]
> sent [LCP TermAck id=0x10]
> rcvd [LCP TermAck id=0x10]
> Connection terminated.
> Serial connection established.
> using channel 83
> Using interface ppp0
> Connect: ppp0 <--> /dev/ttyS0
> sent [LCP ConfReq id=0x11 <asyncmap 0xa0000> <pcomp> <accomp>]
> Modem hangup
> Connection terminated.
> ------------------------------------------------------
> can somebody tell me why peers refused to agree IP address.Is
> something missing in options file for which peers refuses toIP address.
> Can somebody guide me.
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|