ts-7000
[Top] [All Lists]

[ts-7000] Re: pppd lcp packet

To:
Subject: [ts-7000] Re: pppd lcp packet
From: "ts7300" <>
Date: Thu, 22 Jan 2009 11:47:25 -0000
on the linux Distro side.
asyncmap
cdtrcts
10.64.21.37:10.64.21.30
nomagic
passive
persist
dump
nolock
-detach
mtu 1500
mru 1500
-----------------
At Board Side
asyncmap
cdtrcts
10.64.21.30:10.64.21.37
nomagic
passive
persist
dump
nolock
-detach
mtu 1500
mru 1500
proyarp
ktune
usepeersdns

Thanx
-----------------------
--- In  "odonovan_dan" <> wrote:
>
> Hi
> 
> Can you post the /etc/ppp/options* files that you're using on both
> sides of the link, as well as any additional parameters that you may
> be passing to pppd?
> 
> Thanks,
> -Dan
> 
> 
> 
> --- In  "ts7300" <ts7300@> wrote:
> >
> > hi,
> >    I am using ts7300 board and linux disrto for PPP link.and at board
> > side mgetty is running.When I am dialing from Linux Distro pppd call
> ppp0
> > Lcp packet
> > Using interface ppp0
> > Connect: ppp0 <--> /dev/ttyS0
> > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > rcvd [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > sent [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > rcvd [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > sent [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> > sent [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > <ms-dns3 0.0.0.0>]
> > rcvd [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> > sent [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> > rcvd [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > <ms-dns3 0.0.0.0>]
> > sent [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > rcvd [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
> > Deflate (15) compression enabled
> > rcvd [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > sent [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > rcvd [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > sent [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > rcvd [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > sent [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > rcvd [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > sent [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > rcvd [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > sent [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > rcvd [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > sent [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > rcvd [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > sent [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > rcvd [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > sent [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > rcvd [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > sent [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > rcvd [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > sent [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > rcvd [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > sent [IPCP ConfReq id=0x3e]
> > rcvd [IPCP ConfReq id=0x3e]
> > sent [IPCP ConfAck id=0x3e]
> > rcvd [IPCP ConfAck id=0x3e]
> > Peer refused to agree to our IP address
> > Connect time 0.7 minutes.
> > Sent 176 bytes, received 176 bytes.
> > sent [IPCP TermReq id=0x3f "Refused our IP address"]
> > sent [IPCP TermReq id=0x40 "Refused our IP address"]
> > sent [LCP TermReq id=0x10 "No network protocols running"]
> > rcvd [LCP TermReq id=0x10 "No network protocols running"]
> > sent [LCP TermAck id=0x10]
> > rcvd [LCP TermAck id=0x10]
> > Connection terminated.
> > Serial connection established.
> > using channel 83
> > Using interface ppp0
> > Connect: ppp0 <--> /dev/ttyS0
> > sent [LCP ConfReq id=0x11 <asyncmap 0xa0000> <pcomp> <accomp>]
> > Modem hangup
> > Connection terminated.
> > ------------------------------------------------------
> > can somebody tell me why peers refused to agree IP address.Is
> > something missing in options file for which peers refuses toIP
address.
> > Can somebody guide me.
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU