ts-7000
[Top] [All Lists]

[ts-7000] Re: pppd lcp packet

To:
Subject: [ts-7000] Re: pppd lcp packet
From: "ts7300" <>
Date: Fri, 23 Jan 2009 09:02:33 -0000
As per suggested in last thread,Now option file at board side
ipcp-accept-local
 ipcp-accept-remote
 proxyarp
 ktune
usepeersdns
persist
debug
asyncamp
nolock
cdtrcts
nomagic
mru 1500
mtu 1500
0.64.21.30:10.64.21.37
----------------------------
On Linux Distro
 persist
 debug
asyncamp
nolock
cdtrcts
nomagic
mru 1500
mtu 1500
10.64.21.37:10.64.21.30
And dialinig is done at linux distro ising -->pppd call ppp0
Lcp packet
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0xa0000> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0xa0000> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0xa0000> <pcomp> <accomp>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 10.64.21.37>
<ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 10.64.21.37>
<ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfRej id=0x1 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
rcvd [IPCP ConfRej id=0x1 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 10.64.21.37>]
rcvd [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 10.64.21.37>]
sent [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 10.64.21.37>]
rcvd [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 10.64.21.37>]
local  IP address 10.64.21.37
remote IP address 10.64.21.37
Script /etc/ppp/ip-up started (pid 10210)
Script /etc/ppp/ip-up finished (pid 10210), status = 0x0
Modem hangup
Connect time 160.2 minutes.
Sent 0 bytes, received 0 bytes.
Script /etc/ppp/ip-down started (pid 10430)
Connection terminated.
Script /etc/ppp/ip-down finished (pid 10430), status = 0x0
Connect script failed

Still their is problem in IP address in LCP nego. packet it showing
same ip address of remote and local.why its taking same ip address.? 
-----------------------------------------------------------------
--- In  "odonovan_dan" <> wrote:
>
> I forgot to mention earlier that I also use these options on the side
> of the link which is receiving the IP addresses:
> 
> ipcp-accept-local
> ipcp-accept-remote
> 
> 
> --- In  "odonovan_dan" <danodonovan@> wrote:
> >
> > You only need to specify the local_ip:remote_ip option on one side of
> > the link.
> > Choose which side you want to control the IP address allocation, and
> > use the option there.
> > 
> > If that doesn't work, let me know.
> > 
> > 
> > --- In  "ts7300" <ts7300@> wrote:
> > >
> > > At Board Side
> > > proxyarp
> > > ktune
> > > usepeersdns
> > > persist
> > > debug
> > > asyncamp
> > > nolock
> > > cdtrcts
> > > nomagic
> > > mru 1500
> > > mtu 1500
> > > 10.64.21.30:10.64.21.37
> > > ----------
> > > On Linux Distro
> > > persist
> > > debug
> > > asyncamp
> > > nolock
> > > cdtrcts
> > > nomagic
> > > mru 1500
> > > mtu 1500
> > > 10.64.21.37:10.64.21.30
> > > 
> > > Thanx
> > > --- In  "odonovan_dan" <danodonovan@> wrote:
> > > >
> > > > Hi
> > > > 
> > > > Can you post the /etc/ppp/options* files that you're using on both
> > > > sides of the link, as well as any additional parameters that
you may
> > > > be passing to pppd?
> > > > 
> > > > Thanks,
> > > > -Dan
> > > > 
> > > > 
> > > > 
> > > > --- In  "ts7300" <ts7300@> wrote:
> > > > >
> > > > > hi,
> > > > >    I am using ts7300 board and linux disrto for PPP link.and at
> > board
> > > > > side mgetty is running.When I am dialing from Linux Distro
> pppd call
> > > > ppp0
> > > > > Lcp packet
> > > > > Using interface ppp0
> > > > > Connect: ppp0 <--> /dev/ttyS0
> > > > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > rcvd [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > sent [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > rcvd [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > sent [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> > 15>]
> > > > > sent [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > > > > <ms-dns3 0.0.0.0>]
> > > > > rcvd [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> > 15>]
> > > > > sent [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> > 15>]
> > > > > rcvd [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > > > > <ms-dns3 0.0.0.0>]
> > > > > sent [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > > > rcvd [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> > 15>]
> > > > > Deflate (15) compression enabled
> > > > > rcvd [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > > > sent [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > > > > rcvd [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > > > > sent [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > > > > rcvd [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > > > > sent [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > > > > rcvd [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > > > > sent [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > > > > rcvd [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > > > > sent [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > > > > rcvd [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > > > > sent [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > > > > rcvd [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > > > > sent [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > > > > rcvd [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > > > > sent [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > > > > rcvd [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > > > > sent [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > > > > rcvd [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > > > > sent [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > > > > rcvd [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > > > > sent [IPCP ConfReq id=0x3e]
> > > > > rcvd [IPCP ConfReq id=0x3e]
> > > > > sent [IPCP ConfAck id=0x3e]
> > > > > rcvd [IPCP ConfAck id=0x3e]
> > > > > Peer refused to agree to our IP address
> > > > > Connect time 0.7 minutes.
> > > > > Sent 176 bytes, received 176 bytes.
> > > > > sent [IPCP TermReq id=0x3f "Refused our IP address"]
> > > > > sent [IPCP TermReq id=0x40 "Refused our IP address"]
> > > > > sent [LCP TermReq id=0x10 "No network protocols running"]
> > > > > rcvd [LCP TermReq id=0x10 "No network protocols running"]
> > > > > sent [LCP TermAck id=0x10]
> > > > > rcvd [LCP TermAck id=0x10]
> > > > > Connection terminated.
> > > > > Serial connection established.
> > > > > using channel 83
> > > > > Using interface ppp0
> > > > > Connect: ppp0 <--> /dev/ttyS0
> > > > > sent [LCP ConfReq id=0x11 <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > > Modem hangup
> > > > > Connection terminated.
> > > > > ------------------------------------------------------
> > > > > can somebody tell me why peers refused to agree IP address.Is
> > > > > something missing in options file for which peers refuses toIP
> > > address.
> > > > > Can somebody guide me.
> > > > >
> > > >
> > >
> >
>



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU