I forgot to mention earlier that I also use these options on the side
of the link which is receiving the IP addresses:
ipcp-accept-local
ipcp-accept-remote
--- In "odonovan_dan" <> wrote:
>
> You only need to specify the local_ip:remote_ip option on one side of
> the link.
> Choose which side you want to control the IP address allocation, and
> use the option there.
>
> If that doesn't work, let me know.
>
>
> --- In "ts7300" <ts7300@> wrote:
> >
> > At Board Side
> > proxyarp
> > ktune
> > usepeersdns
> > persist
> > debug
> > asyncamp
> > nolock
> > cdtrcts
> > nomagic
> > mru 1500
> > mtu 1500
> > 10.64.21.30:10.64.21.37
> > ----------
> > On Linux Distro
> > persist
> > debug
> > asyncamp
> > nolock
> > cdtrcts
> > nomagic
> > mru 1500
> > mtu 1500
> > 10.64.21.37:10.64.21.30
> >
> > Thanx
> > --- In "odonovan_dan" <danodonovan@> wrote:
> > >
> > > Hi
> > >
> > > Can you post the /etc/ppp/options* files that you're using on both
> > > sides of the link, as well as any additional parameters that you may
> > > be passing to pppd?
> > >
> > > Thanks,
> > > -Dan
> > >
> > >
> > >
> > > --- In "ts7300" <ts7300@> wrote:
> > > >
> > > > hi,
> > > > I am using ts7300 board and linux disrto for PPP link.and at
> board
> > > > side mgetty is running.When I am dialing from Linux Distro
pppd call
> > > ppp0
> > > > Lcp packet
> > > > Using interface ppp0
> > > > Connect: ppp0 <--> /dev/ttyS0
> > > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > sent [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > rcvd [LCP ConfReq id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > sent [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > rcvd [LCP ConfAck id=0xf <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > sent [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> 15>]
> > > > sent [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > > > <ms-dns3 0.0.0.0>]
> > > > rcvd [CCP ConfReq id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> 15>]
> > > > sent [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> 15>]
> > > > rcvd [IPCP ConfReq id=0x38 <addr 10.64.21.37> <ms-dns1 0.0.0.0>
> > > > <ms-dns3 0.0.0.0>]
> > > > sent [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > > rcvd [CCP ConfAck id=0x8 <deflate 15> <deflate(old#) 15> <bsd v1
> 15>]
> > > > Deflate (15) compression enabled
> > > > rcvd [IPCP ConfRej id=0x38 <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
> > > > sent [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > > > rcvd [IPCP ConfReq id=0x39 <addr 10.64.21.37>]
> > > > sent [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > > > rcvd [IPCP ConfNak id=0x39 <addr 10.64.21.30>]
> > > > sent [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > > > rcvd [IPCP ConfReq id=0x3a <addr 10.64.21.37>]
> > > > sent [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > > > rcvd [IPCP ConfNak id=0x3a <addr 10.64.21.30>]
> > > > sent [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > > > rcvd [IPCP ConfReq id=0x3b <addr 10.64.21.37>]
> > > > sent [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > > > rcvd [IPCP ConfNak id=0x3b <addr 10.64.21.30>]
> > > > sent [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > > > rcvd [IPCP ConfReq id=0x3c <addr 10.64.21.37>]
> > > > sent [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > > > rcvd [IPCP ConfNak id=0x3c <addr 10.64.21.30>]
> > > > sent [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > > > rcvd [IPCP ConfReq id=0x3d <addr 10.64.21.37>]
> > > > sent [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > > > rcvd [IPCP ConfNak id=0x3d <addr 10.64.21.30>]
> > > > sent [IPCP ConfReq id=0x3e]
> > > > rcvd [IPCP ConfReq id=0x3e]
> > > > sent [IPCP ConfAck id=0x3e]
> > > > rcvd [IPCP ConfAck id=0x3e]
> > > > Peer refused to agree to our IP address
> > > > Connect time 0.7 minutes.
> > > > Sent 176 bytes, received 176 bytes.
> > > > sent [IPCP TermReq id=0x3f "Refused our IP address"]
> > > > sent [IPCP TermReq id=0x40 "Refused our IP address"]
> > > > sent [LCP TermReq id=0x10 "No network protocols running"]
> > > > rcvd [LCP TermReq id=0x10 "No network protocols running"]
> > > > sent [LCP TermAck id=0x10]
> > > > rcvd [LCP TermAck id=0x10]
> > > > Connection terminated.
> > > > Serial connection established.
> > > > using channel 83
> > > > Using interface ppp0
> > > > Connect: ppp0 <--> /dev/ttyS0
> > > > sent [LCP ConfReq id=0x11 <asyncmap 0xa0000> <pcomp> <accomp>]
> > > > Modem hangup
> > > > Connection terminated.
> > > > ------------------------------------------------------
> > > > can somebody tell me why peers refused to agree IP address.Is
> > > > something missing in options file for which peers refuses toIP
> > address.
> > > > Can somebody guide me.
> > > >
> > >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|