--- In pierre lafrance <>
wrote:
>
>
> Hi
> I have done dd image file to FLASH,
> expand partition 3 with ext2resize,
> check summed first 100bytes of image file on disk and on FLASH,
> all was successful
>
> Then I boot TS-7300 with this FLASH.
> Fastboot was done correctly,
> I wrote exit, then nothing happen (board freeze as usual)
>
> Once, I cycled power of the board a second time, then made ls
command after fastboot.
> ls displayed files correctly
> then I wrote exit, TS-7300 started boot correctly...!!!
>
> It looked to me the delay between fastboot is done and when I write
exit is important.
> To verify that, I removed jumper J6, cycle power, board freeze...
>
> Put back jumper J6, cycle power, wait 1minutes after fastboot was
done, and wrote exit, board booted correctly...
> Got the same behavior with a second FLASH card...!!!
> What the hell is going on with this board ?
>
> Pierre
>
OK. that's considerable progress in terms of know where you are. Now
you have a clearer idea of what is going on , have you contacted TS?
Since it's all pretty much std TS with a flash on the image they
provide, it seems you have a legitimate support issue.
/js
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|