--- In pierre lafrance <>
wrote:
>
>
> on my Ubuntu system, in the:
> Uncompressed downloaded file from link : http://www.embeddedarm.com/
software/arm-linux-fastboot-ts7300.php:
> with this command : bunzip2 sdimage.dd.bz2
> copy file from HDD to SD on sdb with this command : dd if=/
EmbeddedArm/SW/DiskImage/sdimage.dd of=/dev/sdb
>
> The TS-7300 boot, then I write «exit» at command prompt to complete
boot.
> Then TS-7300 goes bye bye, cursor blink, and that's it, nothing
happen
>
> Thanks
>
> Pierre
>
Hi,
7300 does not come with a keyboard so maybe you could start by saying
how you are communicating with the board. ssh, telnet, serial ?
What do you expect to happen when you type the exit command? What do
you think you are exiting from?
Despite your title "7300 doesn't boot" you now say "The TS-7300 boot".
Can you explain (with actual output, not chat) what is happening?
If you don't post exactly what state the board is in no one here can
look over your shoulder to see what you see.
Help us to help you.
regards.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|