--- In pierre lafrance <>
wrote:
>
>
> Hi J,
> Sorry about the lack of information. I Didn't realize TS boards
comes and can run in different variation.
> The Ts-7300 has a keyboard, a VGA, and Ethernet connected to it
(connected to my MODEM/Router w firewall).
> When power up, the board display on the VGA is :
> «
> Finished booting in 2.86 seconds
> Type 'exit' for full boot - remove J6 to make this the default
> $
> »
> When writing exit, nothing happen. It use to work couple days ago,
with FLASH from EmbeddedArm.
> What's next ?
>
> Thanks,
>
> Pierre
I noted in another thread you said you were new to linux and willing
to learn. So here's where you start learning ;)
Check my second post above , you may have missed it before posting
your reply. I indicated what you should check first since it seems
you lock up when you try to exit fastboot initrd and switch to your
debian fs on the sdcard.
You need to make sure it's there. You should be able to do that from
your fastboot shell with basic linux commands.
If you need spoon feeding with that I don't have the time to give you
a step by step beginner's guide to linux and this list is not the
place if I did. You should have no problem finding that sort of
material in either French or English.
If you find you don't have the fs then you need to recheck the "dd"
file and retry the copy to sdcard. If you have specific errors with
that post back some info about the problem.
best regards, Jacques.
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|