On Tue, 23 Dec 2008, pierrotlafouine wrote:
> Hi,
> I just received a TS-7300. I installed it, and connected it to my
> MODEM/Router with firewall (AT& 2700HG-B).
> I'm not and Ethernet specialist, but I think I can tell that the board
> works with static IP in LLA range (eth0 IP is 192.168.1.138).
> MODEM/Router detected the TS-7300 when I pinged 192.168.1.138. So far
> so good. But TS-7300 can't access ftp site when I try "apt-get
> install hexedit". Look likes TS-7300 doesn't go beyond MODEM/Router,
> but all other computers on the same MOMDEM, working with static IP,
> with Ubuntu and Windoz work fine.
>
> Anything I could try to debug and fix this issue ?
> Also, I am pretty new to Linux :-( If you have any idea, just be very
> explicit in details... ;-D
>
sounds like you need to set a default route...
# route add default gw ip-address-of-your-router
Not sure about the setup of the ts7300, so can't advise on you make that
done on startup
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|