Re: [ts-7000] Re: TS7800 misc

[Michael Schmidt <>]

mikeciaraldi wrote:
> ttts2 and 3 are on header COM2, and ttts4 and 5 are on header COM3.
> All four are RS-232 compatible. I am using an RS232-to-TTL adapter
> from Acroname to interface one of them to a CMUcam2+, which uses only
> TTL signal levels.

How are you getting RS-232 on ttts2 and ttts3?  Which port are you using 
the RS232-to-TTL adapter?

  ______   Best Regards,
|__  __/                  Michael Schmidt
    ||                   Software Engineer
    ||echnologic Systems (EmbeddedARM.com)
    || (480)    16610 East Laser Drive #10
    |/ 837-5200   Fountain Hills, AZ 85268
        http://oz.embeddedarm.com/~michael

------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/