Michael,
The drivers are installed and I see "/dev/ttts0",etc. with 'dmseg'
command.
I found some code you provided in message 11393 (using select()) and
compiled it with term.c. Still no luck on /dev/ttts4.
I ran the same code on CPU COM2 and it works...
Tim
--- In Michael Schmidt <> wrote:
>
> tim wen wrote:
> > Dear group,
> > We are in the process of evaluating TS7800 for use in an upcoming
project.
> > I have some questions:
> > 1. Has anyone got the TSUART serial ports to work? I have luck using
> > CPU COM2,
>
> The following modules must be loaded: tsuart1, tsuart7800.
> You may also want to try using this code to set up the serial ports:
> ftp://ftp.embeddedARM.com/tmp/term.c
>
>
> ______ Best Regards,
> |__ __/ Michael Schmidt
> || Software Engineer
> ||echnologic Systems (EmbeddedARM.com)
> || (480) 16610 East Laser Drive #10
> |/ 837-5200 Fountain Hills, AZ 85268
> http://oz.embeddedarm.com/~michael
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|