Hello,
> For BSP development as a minimum you need a piece of software that can load
> code into RAM,
>
> modify the program counter, and execute. A good JTAG interface is ideal for
>
> developing a WinCE BSP. TS-7400 and the TS-7800 do not have JTAG
>
> access to the CPU, JTAG is only implemented for CPLD/FPGA programming.
I just wanted to clarify, the TS-7800 does have JTAG access to the CPU.
The JTAG chain includes the CPU, FPGA, CPLD, and the phy...
--
Best Regards,
________________________________________________________________
Eddie Dawydiuk, Technologic Systems | voice: (480) 837-5200
16610 East Laser Drive Suite 10 | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|