>> I don't recall but are any of the JTAG connections exposed as vias on
>> the TS7400, or is the CPU JTAG disabled by the PCB routing?
>>
>
> On the TS-7400 CPU JTAG is disabled by the PCB routing.
>
Taking a look at your lineup, the quickest WinCE BSP to develop would be
for the TS-7200. I can have it boot a WinCE image selectively from
Serial port, Flash, SD/CompactFlash, or Ethernet. Short of NAND/NOR,
SD/CF, variances in .bib file, the bootloader code would identical for
all your EP9302 boards.
Regards,
Joel Winarske
Independent Electronics / Smart e-Works LLC
707.320.4271 Office
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|