Eddie Dawydiuk wrote:
> Hello,
>
>
>> For BSP development as a minimum you need a piece of software that can load
>> code into RAM,
>>
>> modify the program counter, and execute. A good JTAG interface is ideal for
>>
>> developing a WinCE BSP. TS-7400 and the TS-7800 do not have JTAG
>>
>> access to the CPU, JTAG is only implemented for CPLD/FPGA programming.
>>
>
> I just wanted to clarify, the TS-7800 does have JTAG access to the CPU.
> The JTAG chain includes the CPU, FPGA, CPLD, and the phy...
>
This is good to hear.
I don't recall but are any of the JTAG connections exposed as vias on
the TS7400, or is the CPU JTAG disabled by the PCB routing?
Thanks,
Joel
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|