Dave Cramer wrote:
> Interesting, do you recall if the calibrated one measured properly ?
> And if so how does it measure > 5v ?
I have not checked any of the boards for the accuracy of the A/D readings. I
can't tell you if the calibrated board was more, or less, accurate than an
uncalibrated board.
AFAIK, the boards can only read voltages in the range of 0 to 3.3V. To read a
voltage greater than 3.3V would require the scaling of the input voltage to
fit within the allowed range.
--
Cheers!
Kevin.
http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
| Try to assimilate the world!"
#include <disclaimer/favourite> | -Pinkutus & the Borg
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|