On 19-Feb-08, at 1:37 AM, Kevin Cozens wrote:
> Dave Cramer wrote:
> > Using the sample program adc_7250. I get the following output on
> my 7260
> >
> > ./adc_7250
> > Calibration Values =
> > [ 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff
> > 0xffff ]
> > No calibration values found...
> [snip]
> > 1) I gather it's not been calibrated, are any of them ?
>
> So far, I've only seen three 7250 boards. Only one was calibrated.
>
Interesting, do you recall if the calibrated one measured properly ?
And if so how does it measure > 5v ?
>
>
> --
> Cheers!
>
> Kevin.
>
> http://www.ve3syb.ca/ |"What are we going to do today, Borg?"
> Owner of Elecraft K2 #2172 |"Same thing we always do, Pinkutus:
> | Try to assimilate the world!"
> #include <disclaimer/favourite> | -Pinkutus & the Borg
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|