Re: [ts-7000] on board A/D questions

[Kevin Cozens <>]

Dave Cramer wrote:
> Using the sample program adc_7250. I get the following output on my 7260
> 
> ./adc_7250
> Calibration Values =
> [ 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff
> 0xffff ]
> No calibration values found...
[snip]
> 1) I gather it's not been calibrated, are any of them ?

So far, I've only seen three 7250 boards. Only one was calibrated.

-- 
Cheers!

Kevin.

http://www.ve3syb.ca/           |"What are we going to do today, Borg?"
Owner of Elecraft K2 #2172      |"Same thing we always do, Pinkutus:
                                 |  Try to assimilate the world!"
#include <disclaimer/favourite> |              -Pinkutus & the Borg


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/