[ts-7000] on board A/D questions

[Dave Cramer <>]

Using the sample program adc_7250. I get the following output on my 7260

./adc_7250
Calibration Values =
[ 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff  
0xffff  ]
No calibration values found...
Channel 0: 0.349V
Channel 1: 0.785V
Channel 2: 1.664V
Channel 3: 1.843V
Channel 4: 1.664V

1) I gather it's not been calibrated, are any of them ?
2) Channel 0 is used to monitor the Power In. On the 7260 that can go  
from 5-20V but the A.D can only measure up to 3.3 v. Has it been  
compensated ?

Dave


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/