Jeff Cunningham napsal(a):
> Martin Guy wrote:
>> 2007/12/25, jcunningham63 <
>> <jeffrey%40cunningham.net>>:
>>> If I set
>>> init=/sbin/init it gives the error message as before that it can't
>>> mount NFS.
>> ??? Well, it's getting a different IP address. Is there already a .13
>> on the net (grasping at straws here too]
>>
>>> df: `/proc/bus/usb': No such file or directory
>> Because init=/sbin/init and /etc/{rc,init}.d/* haven't been run.
>> If your shell starts, then init should too.
>> What root filesystem are you using?
>>
>> M
>>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi Martin,
>
> The NFS server is 192.168.1.13
> The NFS export is /home/ts7200/sarge2
> It contains the root file system: debian-sarge-udev-11-15-2007 which I
> obtained from the link on the TS website's 2.6 kernel page
> The TS7200 is receiving 192.168.1.103 from the dhcp server. I'm not sure
> what you mean by "its getting a different IP address". Can you explain?
>
> I tried running init 3 from the shell and it it gives me this error:
>
> sh-2.05b# init 3
> init: timeout opening/writing control channel /dev/initctl
Your NFS is exported ro ? Try export and mount rw.
Dan
>
> --Jeff
>
>
>
>
>
>
>
>
>
>>
>
>
>
>
> Yahoo! Groups Links
>
>
>
--
Mydatex s r.o.
http://www.mydatex.cz
email:
mob: 604200362
tel: 226210085
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|