Martin Guy wrote:
>
> 2007/12/25, jcunningham63 <
> <jeffrey%40cunningham.net>>:
> > If I set
> > init=/sbin/init it gives the error message as before that it can't
> > mount NFS.
> ??? Well, it's getting a different IP address. Is there already a .13
> on the net (grasping at straws here too]
>
> > df: `/proc/bus/usb': No such file or directory
> Because init=/sbin/init and /etc/{rc,init}.d/* haven't been run.
> If your shell starts, then init should too.
> What root filesystem are you using?
>
> M
>
Hi Martin,
The NFS server is 192.168.1.13
The NFS export is /home/ts7200/sarge2
It contains the root file system: debian-sarge-udev-11-15-2007 which I
obtained from the link on the TS website's 2.6 kernel page
The TS7200 is receiving 192.168.1.103 from the dhcp server. I'm not sure
what you mean by "its getting a different IP address". Can you explain?
I tried running init 3 from the shell and it it gives me this error:
sh-2.05b# init 3
init: timeout opening/writing control channel /dev/initctl
--Jeff
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|