Daniel Smolik wrote:
<snip to end of listing>
> mount: you didn't specify a filesystem type for
> /dev/ide/host0/bus0/target0/lun0/part1
> I will try all types mentioned in /etc/filesystems or
> /proc/filesystems
> Trying yaffs
> mount: special device /dev/ide/host0/bus0/target0/lun0/part1 does not
exist
> Setting up networking...done.
> Setting up IP spoofing protection: rp_filter.
> Enabling packet forwarding...done.
> Configuring network interfaces...nfs: server 192.168.1.13 not
> responding, still trying
> nfs: server 192.168.1.13 not responding, still trying
>
>
> Any help would be greatly appreciated!
> I think that main problem may be that TS 2.6.x kernel doesn't support
> IDE interface on TS-7200. Look at my previous messages about 2.6.x on
> TS-7200.
Dan
Hi Dan,
Thanks for the reply. I understand about the ide mount and will look
into building a 2.6.23 kernel using your patches. But why won't this one
mount the NFS mount? It seems like that should be unrelated, shouldn't it?
And, what 2.6.23 kernel sources should I use to apply your patches to?
Do you have a link by any chance?
Thanks!
--Jeff
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|