Thank you Peter,
I called them instead of email, and they answered all my questions, i have
ordered the TS 7300-64 , plus devkit , canbus, wireless and some other bits
and pieces, extremely helpful chap called Eddie on the phone .
They say the CAN 2.0B is tested and drivers are available for 1Mbps.
Now all i have to do is find a suitable transflective / sunreadable 7-8"
touchscreen LCD.
cheers
> I use a TS-7300 with the enclosure and a TS-BAT3 board. You simply
> move the 5V power out from the enclosure PSU PCV to the BAT3 5V input
> connector and ignore the 12/24V input.
>
> I added an 800x600 10.4" serial touch LCD (custom version of the
> NagasakiIPC LM-104T), and a custom PCB connected to the FPGA header.
>
> I've not used the CAN port as I repurposed the pin for my encoder
> board.
>
> With regard to Technologic Systems, I've had very positive dealings
> with them. I would think they're very busy at the moment getting the
> TS-7800 out the door.
>
> Hope this helps,
>
> PJE
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|