--- In "Charlie Wallace" <> wrote:
>
> Will the TS-BAT3 work with enclosure, should i get it instead? Its
for an
> automotive application so controlled shutdown/startup is something
to
> consider.
>
I use a TS-7300 with the enclosure and a TS-BAT3 board. You simply
move the 5V power out from the enclosure PSU PCV to the BAT3 5V input
connector and ignore the 12/24V input.
I added an 800x600 10.4" serial touch LCD (custom version of the
NagasakiIPC LM-104T), and a custom PCB connected to the FPGA header.
I've not used the CAN port as I repurposed the pin for my encoder
board.
With regard to Technologic Systems, I've had very positive dealings
with them. I would think they're very busy at the moment getting the
TS-7800 out the door.
Hope this helps,
PJE
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|