I tried it last week with good results. I loaded an initrdfile by
writing "load -r -b 0x00800000 -m xmodem". After that you will see
"CCCC" outputted from redboot until you have told your terminal to send
the file. I had to wait 10 minutes for 8Mb to transfer. I got some
packages that were resent (which is quite normal) and then redboot said:
"Raw file loaded 0x00800000-0x00b15a1e, assumed entry at 0x00800000
xyzModem - CRC mode, 25269(SOH)/0(STX)/0(CAN) packets, 9 retries"
Good luck
Per Öberg
>> There seems to be a vague reference in the redboot docs about loading
>> via serial rather than network, but it's never explained. Is this
>> possible? If so how?
>
> I've never used this functionality so I'm unfamiliar. I would refer to
> the Redboot users guide for information on this. Maybe someone else
> can comment on this.
>
> http://ecos.sourceware.org/docs-latest/redboot/redboot-guide.html
>
> //Eddie
>
>
>
> Yahoo! Groups Links
>
>
>
--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail:
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|