Sweet,
I didn't know that you could load an initrd file that way!
Thanks for the tip Per ;-)
~/Chris
Per Öberg wrote:
> I tried it last week with good results. I loaded an initrdfile by
> writing "load -r -b 0x00800000 -m xmodem". After that you will see
> "CCCC" outputted from redboot until you have told your terminal to send
> the file. I had to wait 10 minutes for 8Mb to transfer. I got some
> packages that were resent (which is quite normal) and then redboot said:
>
> "Raw file loaded 0x00800000-0x00b15a1e, assumed entry at 0x00800000
> xyzModem - CRC mode, 25269(SOH)/0(STX)/0(CAN) packets, 9 retries"
>
> Good luck
> Per Öberg
>
>>> There seems to be a vague reference in the redboot docs about loading
>>> via serial rather than network, but it's never explained. Is this
>>> possible? If so how?
>> I've never used this functionality so I'm unfamiliar. I would refer to
>> the Redboot users guide for information on this. Maybe someone else
>> can comment on this.
>>
>> http://ecos.sourceware.org/docs-latest/redboot/redboot-guide.html
>>
>> //Eddie
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|