Re: [ts-7000] Re: serial and ethernet cabels of ts-7250 boards

["Alvaro Aguirre" <>]

I only can spec about what is a dummy and full handshaking cables but you only need a cable without handshaking (but anyone will do the job for the TS)

On 1/29/07, HOSAM YOUSIF <> wrote:

there are 3 types of serial i want to know who i will use:
1.without handshaking
2.dummy handshaking
3.full handshaking
--- In ts-7000%40yahoogroups.com, Per Öberg <> wrote:
>
> Hi
>
> > 1. the type of serial cable between my pc and ts-7250 is
crossover or
> > straight.
>
> Crossover
>
> > 2. the type of ethernet cable between my pc and ts-7250 is
crossover
> > or straight.
>
> Crossover
>
> > 3. i have power supply it's output is 5v and 2A this power
sufficient
> > or my board will in danger.
>
> I have 2A and I have no problems. I will not promise anything but i
> doubt that having to weak PS will damage your TS-board. If
anything, it
> might damage your supply.
>
> //Per Öberg
>
>
> --
> Per Öberg, Ph.D. Student
> Address: Division of Vehicular Systems
> Department of Electrical Engineering
> Linköpings universitet
> 581 83 Linköping, SWEDEN
> Phone: +46 (0)13-28 23 69
> e-mail:
>

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___