ts-7000
[Top] [All Lists]

[ts-7000] Re: serial and ethernet cabels of ts-7250 boards

To:
Subject: [ts-7000] Re: serial and ethernet cabels of ts-7250 boards
From: "HOSAM YOUSIF" <>
Date: Mon, 29 Jan 2007 16:22:19 -0000
there are 3 types of serial i want to know who i will use:
1.without handshaking
2.dummy handshaking
3.full handshaking
--- In  Per Öberg <> wrote:
>
> Hi
>
> > 1.  the type of serial cable between my pc and ts-7250 is
crossover or
> > straight.
>
> Crossover
>
> > 2.  the type of ethernet cable between my pc and ts-7250 is
crossover
> > or straight.
>
> Crossover
>
> > 3.  i have power supply it's output is 5v and 2A this power
sufficient
> > or my board will in danger.
>
> I have 2A and I have no problems. I will not promise anything but i
> doubt that having to weak PS will damage your TS-board. If
anything, it
> might damage your supply.
>
> //Per Öberg
>
>
> --
> Per Öberg, Ph.D. Student
> Address: Division of Vehicular Systems
> Department of Electrical Engineering
> Linköpings universitet
> 581 83 Linköping, SWEDEN
> Phone: +46 (0)13-28 23 69
> e-mail: 
>





Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU