Re: [ts-7000] serial and ethernet cabels of ts-7250 boards

[Per Öberg <>]

Hi

> 1.  the type of serial cable between my pc and ts-7250 is crossover or
> straight.

Crossover

> 2.  the type of ethernet cable between my pc and ts-7250 is crossover
> or straight.

Crossover

> 3.  i have power supply it's output is 5v and 2A this power sufficient
> or my board will in danger.

I have 2A and I have no problems. I will not promise anything but i
doubt that having to weak PS will damage your TS-board. If anything, it
might damage your supply.

//Per Öberg


--
Per Öberg, Ph.D. Student
Address: Division of Vehicular Systems
Department of Electrical Engineering
Linköpings universitet
581 83 Linköping, SWEDEN
Phone: +46 (0)13-28 23 69
e-mail: 



Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
    
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/