Hello,
> Apologies for wasting group bandwidth; however, in spite of extensive
> searching I was not able to uncover this pearl of wisdom. (Is it
> documented anywhere?)
I'm not sure, I'll see if I can have this added if it doesn't exists in
any documents...
//Eddie
> --- In Eddie Dawydiuk <> wrote:
>>
>> Hello,
>>
>>> However, in this case, I am using COM1 and receive all the expected
>>> boot messages.
>>
>> Ensure your terminal emulator has hardware/software flow control
>> disabled. If you have verified this then try using another terminal
>> emulator other than hyperterminal, teraterm is a free open source
>> emulator for windows I would suggest.
>>
>> Although you didn't mention what terminal emulator you are using
>> these are the two issues that cause the problem you described...
>>
>> //Eddie
>>
>>> --- In "David Martin" <dlmarti@> wrote:
>>>>
>>>> This may seam like a stupid response, but are you connecting to the
>>> com1 on
>>>> the board?
>>>> Redboot only uses the first port, even if you have the second port
>>>> configured as the console.
>>>> This was my problem.
>>>>
>>>> On 1/4/07, tyerslockandblock <araneida@> wrote:
>>>>>
>>>>> Hi
>>>>>
>>>>> Having accidentally managed to hose the ts-linux kernel on my
> 7260, I
>>>>> need to restore things to the status quo ante.
>>>>>
>>>>> Naturally (having been a good boy and read the doco :-) I decided to
>>>>> follow the instructions and load the kernel by issuing the
> appropriate
>>>>> commands in RedBoot.
>>>>>
>>>>> However, in spite of having rebooted a gazillion times, I have still
>>>>> not managed to interrupt RedBoot using ctrl+C to get it to drop into
>>>>> the command line.
>>>>>
>>>>
>>>> --
>>>> David L. Martin
>>>> w0snj@
>>>>
>>>
>>>
>>>
>>>
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|