Re: [ts-7000] Interrupting RedBoot - How?

["David Martin" <>]

This may seam like a stupid response, but are you connecting to the com1 on the board?
Redboot only uses the first port, even if you have the second port configured as the console.
This was my problem.

On 1/4/07, tyerslockandblock <> wrote:

Hi

Having accidentally managed to hose the ts-linux kernel on my 7260, I
need to restore things to the status quo ante.

Naturally (having been a good boy and read the doco :-) I decided to
follow the instructions and load the kernel by issuing the appropriate
commands in RedBoot.

However, in spite of having rebooted a gazillion times, I have still
not managed to interrupt RedBoot using ctrl+C to get it to drop into
the command line.

-- 
David L. Martin


__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___