Hi David
Not stupid at all; some people even forget to plug their computers in
and still expect them to work!!
However, in this case, I am using COM1 and receive all the expected
boot messages.
So, alas that doesn't explain the problem :-(
--- In "David Martin" <> wrote:
>
> This may seam like a stupid response, but are you connecting to the
com1 on
> the board?
> Redboot only uses the first port, even if you have the second port
> configured as the console.
> This was my problem.
>
> On 1/4/07, tyerslockandblock <> wrote:
> >
> > Hi
> >
> > Having accidentally managed to hose the ts-linux kernel on my 7260, I
> > need to restore things to the status quo ante.
> >
> > Naturally (having been a good boy and read the doco :-) I decided to
> > follow the instructions and load the kernel by issuing the appropriate
> > commands in RedBoot.
> >
> > However, in spite of having rebooted a gazillion times, I have still
> > not managed to interrupt RedBoot using ctrl+C to get it to drop into
> > the command line.
> >
>
> --
> David L. Martin
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|