Hello,
> I change IRQ and the problem is still the same. Data comming out from
> TS-SER4 in very low speed. Is there other settings that has to be changed?
> Pls let me know as soon as possible.
In my last email I said your problem sounded like your IRQs were not properly
configured. I said this because you said there was a 1 second delay between
sending data and actually seeing any data being send. If you are still seeing
this behavoir then please answer the following questions.
What are your jumper settings? What is the outputs of setserial /dev/tts/n
where n is the serial port you are writing to.
With regard to your comment about the baud rates not being correct, how are
you coming to this conclusion? What baud rate are you expecting and what
baud rate are you seeing? Is you program reconfiguring the baud rate?
//Eddie
> ----- Original Message ----
> From: Eddie Dawydiuk <>
> To:
> Sent: Saturday, September 16, 2006 3:19:07 AM
> Subject: Re: [ts-7000] Need Help on TS-Serial4 !!
>
> Hello,
>
> > I have a TS-7260 SBC and recently i purchase TS-SER4 PC104 extention board.
> > I wrote several programes using those ports but they are woking in very
> > slow manner, they not working in proper baud rate.
> > When I send some srting via one of those serial ports, the reception
> > occurs after about 1s delay in very slow manner.pls help me on this. I need
> > to acsese these axtra COM ports
>
> It sounds like your IRQs are not setup properly. Check your jumper settings
> to determine which IRQ the TS-SER4 is using. Then you can use setserial to
> ensure the proper IRQs are being used.
>
> //Eddie
>
>
>
>
>
>
--
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|