Re: [ts-7000] Need Help on TS-Serial4 !!

["Eddie Dawydiuk" <>]

Hello,

> I have a TS-7260 SBC and recently i purchase TS-SER4 PC104 extention board. I 
> wrote several programes using those ports but they are woking in very slow 
> manner, they not working in proper baud rate.
>    When I send some srting via one of those serial ports, the reception 
> occurs after about 1s delay in very slow manner.pls help me on this. I need 
> to acsese  these axtra COM ports

It sounds like your IRQs are not setup properly. Check your jumper settings
to determine which IRQ the TS-SER4 is using. Then you can use setserial to
ensure the proper IRQs are being used.

//Eddie


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/