Re: [ts-7000] Need Help on TS-Serial4 !!

[Damith Wijewardhana <>]

Dear Eddie,
    I change IRQ and the problem is still the same. Data comming out from TS-SER4 in very low speed. Is there other settings that has to be changed? Pls let me know as soon as possible.

Thanks
Damith

----- Original Message ----
From: Eddie Dawydiuk <>
To:
Sent: Saturday, September 16, 2006 3:19:07 AM
Subject: Re: [ts-7000] Need Help on TS-Serial4 !!

Hello,

> I have a TS-7260 SBC and recently i purchase TS-SER4 PC104 extention board. I wrote several programes using those ports but they are woking in very slow manner, they not working in proper baud rate.
> When I send some srting via one of those serial ports, the reception occurs after about 1s delay in very slow manner.pls help me on this. I need to acsese these axtra COM ports

It sounds like your IRQs are not setup properly. Check your jumper settings
to determine which IRQ the TS-SER4 is using. Then you can use setserial to
ensure the proper IRQs are being used.

//Eddie

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___