I use RS485 Half-Duplex for many of my applications and it works
perfectly. With this option, COM2 is still defaulted to RS232 and
there's only a register to set to switch to RS485 and to clear to turn
back to RS232.
It's that simple.
--- In Andrea Fino <> wrote:
>
> Hi,
>
> I am wondering if ts7200 supports to have a serial port in rs485 mode.
>
> Regards,
> Andrea Fino
>
> --
> Andrea Fino 8-) - "Sistemi su misura di qualita' industriale"
> "Handcrafted systems with industrial quality"
> [Web: http://www.faino.org ]+[Email: ]
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|