Thanks, I was hoping it would be easy. If you have code I can look at, I would
be very happy to have it. I am just getting ready to get the board, and trying
to nail down the software requirements for my first application.
Tom
Quoting john bogus <>:
> --- In wrote:
> >
> > I am considering serial interface options on a TS-7260. I am
> looking at some
> > sensors with SPI and I2C interfaces. I know I can use the SPI
> device, but is
> > there a way to interface to I2C devices? Fewer wires is a plus in
> this application.
> >
> > Thanks,
> >
> > Tom
> >
>
> worse case -> you write the adpter driver to use the gpio pins (a
> small task) on the i2c-algo-bit algorithm drivers. This will use
> two gpio pins to bit-bash the i2c tansactions.
>
> see Documentation/i2c/summary in the linux tree for references.
>
> If you need it I can provide some sample code.
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/6pRQfA/fOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|