[ts-7000] Using I2C interface

ts-7000

[ts-7000] Using I2C interface

from [linux]

To:
Subject:	[ts-7000] Using I2C interface
From:
Date:	Mon, 3 Jul 2006 20:54:42 -0500

I am considering serial interface options on a TS-7260. I am looking at some
sensors with SPI and I2C interfaces. I know I can use the SPI device, but is
there a way to interface to I2C devices? Fewer wires is a plus in this 
application.

Thanks,

Tom







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Using I2C interface, linux <= [ts-7000] EP930 (1\|2) DMA Bandwidth?, Evgeny Belyanco [ts-7000] Re: Using I2C interface, john bogus Re: [ts-7000] Re: Using I2C interface, linux [ts-7000] Re: Using I2C interface, john bogus

Previous by Date:	[ts-7000] Problem with 2 bluetooth dongles on TS-7200, Baschieri Francesco
Next by Date:	[ts-7000] Modules for 2.4.26-ts11, Matt Godbolt
Previous by Thread:	[ts-7000] Problem with 2 bluetooth dongles on TS-7200, Baschieri Francesco
Next by Thread:	[ts-7000] EP930 (1\|2) DMA Bandwidth?, Evgeny Belyanco
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU