Subject: | Re: xlr cable, long run 100FT |
---|---|
From: | "Raimund" animalsounds |
Date: | Sat Feb 19, 2011 6:12 am ((PST)) |
> ... what do you use to protect the mics in case of rain etc? > Anyone else use this? Hi Mark, I'm using simple PVC tubes to protect my (ultrasound) electret and condense= r microphones against direct rain. This works pretty well as it protects bo= th the microphone as well as the cable connection: http://www.avisoft.com/usg/images/micweatherprotection.jpg http://www.avisoft.com/usg/images/micweatherprotection2.jpg I'm currently running a long term test of such a setup in my backyard since= last summer. I still could not detect any whether-rated problems even if t= he microphones were temporarily fully covered with snow. I believe that the= moisture that can possibly enter the cable is not a big issue due to the l= ow output impedance of the microphones, which is much lower than that of wa= ter. Regards, Raimund Avisoft Bioacoustics http://www.avisoft.com |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: xlr cable, long run 100FT, Rob Danielson |
---|---|
Next by Date: | Re: xlr cable, long run 100FT, Martyn Stewart |
Previous by Thread: | Re: xlr cable, long run 100FT, Rob Danielson |
Next by Thread: | Re: xlr cable, long run 100FT, Martyn Stewart |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU