naturerecordists
[Top] [All Lists]

Re: Sound Devices updates the USBPre

Subject: Re: Sound Devices updates the USBPre
From: "Rob Danielson" danielson_audio
Date: Thu Sep 16, 2010 2:17 pm ((PDT))
At 6:13 PM +0000 9/16/10, oryoki2000 wrote:
>
>
>Another portable power solution appears to be the Energizer XP4001, 
>part of the company's Energi to Go series. The XP4001 has two 5V DC 
>ports that provide power to USB specs. Two ports would allow you to 
>simultaneously power the USBPre and a small recorder like the 
>M-Audio Microtrack II.
>
>The XP4001 employs a Lithium-Ion rechargeable battery rated at 4000 
>mAh, which should be enough juice to power the two devices mentioned 
>above for about 4 hours. Price in USA is about $60.
>
><http://www.energizerpowerpacks.com/us/products/xp4001/>http://www.energizerpowerpacks.com/us/products/xp4001/

I think there are inexpensive components that do DC to DC constant 
voltage today. You'd probably want to start with with 6 or 7.2 volts. 
The component could be in the cable to connect to sleds of 5-D size, 
C size, or AA size batteries depending on your needs.

Can anyone sketch-up a battery-powered, constant 5DVC circuit for us 
or am I wrong about such components? Rob D.

  = = =



-- 









<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU