| Subject: | Re: What's needed to run a Sound Devices 7 series recorder from a 12 |
|---|---|
| From: | "Dan Dugan" dandugan_1999 |
| Date: | Wed Aug 12, 2009 4:47 pm ((PDT)) |
> I don't know of commercially available power cords, but you could > get one custom built. Attaching the 4-pin hirose is the hardest > part. You could make it a much easier job by using the cable from a > SD power supply and soldering on the necessary connector. I have > been using Tamiya style connectors to switch between power supply, > battery packs, and car lighter adapter. film-tv has standardized 12V (really 9-18V) power on 4-pin XLR connectors, pin 1 negative, pin 4 positive. -Dan Dugan |
| Previous by Date: | Re: What's needed to run a Sound Devices 7 series recorder from a 12, John Hartog |
|---|---|
| Next by Date: | Re: What's needed to run a Sound Devices 7 series recorder from a 12, Aaron Ximm |
| Previous by Thread: | Re: What's needed to run a Sound Devices 7 series recorder from a 12, John Hartog |
| Next by Thread: | Re: What's needed to run a Sound Devices 7 series recorder from a 12, Aaron Ximm |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU