naturerecordists
[Top] [All Lists]

Re: 744 battery switchover test

Subject: Re: 744 battery switchover test
From: "Michael Raphael"
Date: Fri Oct 24, 2008 10:21 am ((PDT))
Hey Dan,

What battery are you using from pro digital to get that kind of  
batterlife?


On Oct 24, 2008, at 11:40 AM, Dan Dugan wrote:

> Yesterday I ran a test of my 744T with both it and an MP-2 on a Pro
> Digital brick. I was hoping that the added load of the preamp would
> reduce the battery voltage bounce when the 744 disconnected itself,
> and keep it from reconnecting. Nope. It shut down during the 13th hour
> of recording, did not switch to the L-ion battery on the back.
>
> I experimented with pulling the external battery plug several times
> while recording. No problem. So the procedure will be to simply
> disconnect the brick when it gets low. Bummer it won't work
> automatically.
>
> -Dan Dugan
>
> 







<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU