naturerecordists
[Top] [All Lists]

Recording Quad

Subject: Recording Quad
From: "jeremybowker" jeremybowker
Date: Sun Feb 11, 2007 2:24 pm ((PST))
Hello!

I've been experimenting with recording in quad.  I've been using a 744 with an 
external pre 
for channels 3 and 4.  My dilemma with my current set up is: It is impossible 
to make sure 
that all four channels are at the EXACT same level.  (On the 744 only channels 
1 and 2 are 
linkable and have phantom power).  Any ideas?...  (Including buying different 
gear).  I 
apologize if this has been brought up before (I'm new here).  And, in advance, 
thank you for 
your time and knowledge.

All the best!
Jeremy






<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU